Looking for Construction Services in Texas City?
A1 Construction Services
LEADERS IN QUALITY CONSTRUCTION AND PAVING IN SOUTHEAST TEXAS.
Schedule Your FREE Consultation
Services Near Me
Asphalt Contractor in Texas City
Asphalt Contractor specializes in pavement related services for both commercial and residential properties. With more than three decades of expertise, their team knows exactly how to get the job done correctly, on schedule.
With our excellent customer service and comprehensive resources and personnel, we guarantee the best possible outcomes from your paving project. Our professionals have worked on some of the most complex tasks in town--commercial and residential parking lots, airport runways, highways and other paved surfaces.
Proline Paving
Based in San Antonio, Proline Paving has been providing Central Texas residents and business owners with exceptional construction and repair services for decades. Their comprehensive list of services includes new construction/repair work, sealcoating, driveway & road paving work, parking lot striping work - you name it!
Proline Paving provides the highest quality paving materials in the industry, and their team is highly knowledgeable about each material's capabilities. Their experience enables them to produce long-lasting driveways, roads, walkways and more at a fraction of the cost other paving contractors charge!
Driveway Sealcoating
At Proline Paving, the team uses cutting-edge technology to guarantee that your home or business is properly sealed up and shielded from UV radiation, dirt, and other external elements. This process is quick and effortless - keeping your drive looking its best while saving you money on expensive repairs in the future.
Potholes
Potholes in driveways and sidewalks can be a major headache for homeowners, property managers, and businesses of all kinds and sizes. Not only are these unsightly but they may also damage the base of your paved surface - leading to costly repair bills in the future.
Parking Lot Striping/Marking
A well-designed and implemented parking lot marking scheme can save your company money in the long run. From simple signs to an entire stretch of pavement, our experts will teach you all of the intricacies so that everyone uses your lot safely!
Other Major Trends of This Occurrence
Asphalt milling is one of the most important paved construction and maintenance techniques. While asphalt milling may have the sexiest name, recycling old base materials to create a stronger new foundation for your reconstructed roadway is perhaps even more impressive.
Asphalt Maintenance in Texas City
What You Need to Know About Asphalt Maintenance
If you're interested in learning more about Asphalt Maintenance, you've come to the right place. This article covers Preventative maintenance, Crack sealing, Sealcoating, and Overlaying. Hopefully, this article will answer any of your questions. And in case you have any more questions, feel free to contact us directly. Alternatively, you can read about these maintenance practices by reading our articles on paving. Here are a few tips:
Preventative maintenance
A pre-existing pavement is a great place to start with preventative maintenance. Performing regular maintenance on asphalt can help it last longer and prevent the need for expensive repairs later on. You can prepare a checklist of tasks for a regular asphalt maintenance schedule that you can follow to ensure the pavement looks good for as long as possible. There are many ways to maintain your pavement, so make sure you use it to its full potential.
One way to extend the life of asphalt pavement is to perform regular preventative maintenance. This will allow you to extend the life of your pavement structure, which can save you thousands of dollars over the course of ten years. You can learn more about the preventative maintenance process by contacting your city engineer or director of public works. You can also get the necessary supplies and tools for the work yourself. Preventative maintenance will help you save money in the long run, so it's well worth it to consider it before investing in a new pavement.
Crack sealing
In many cases, cracks are not completely sealed, allowing rain and moisture to seep through, eroding the base materials beneath the asphalt and causing potholes. Crack sealing slows the process of deterioration of the pavement by stopping moisture and preventing loss of aggregate. It can save a substantial amount of money over replacing the entire pavement. Here are some reasons to use crack sealing. Hopefully, these tips will prove to be helpful.
First, crack sealing is a long-term treatment. The best time to apply the material is when temperatures are moderate and the cracks are still small. Ideally, it should be applied when cracks are newly developed to maximize its effectiveness. In addition, crack sealing requires a minimum of two weeks to cure. Afterwards, it is recommended to use a de-tacking agent, such as liquid or fine sand, to prevent further damage to the surface.
Sealcoating
If you are in need of asphalt maintenance or repair, you might be considering the benefits of sealcoating. Sealcoat is composed of heated asphalt bitumen, which turns viscous when it dries. Asphalt bitumen is a by-product of crude oil that is used in road construction. However, synthetic tar substances do not require heating before they can be applied to asphalt. In order to apply sealcoating, your asphalt surface must be completely dry and free of all debris.
There are many benefits to sealcoating your asphalt surface. It will prevent cracks and maintain its luster. But, choosing the right sealcoat is essential to keep it looking great and functioning properly for years to come. While some types of sealcoat are better for driveways, asphalt emulsions are the best. They provide protection against traffic while preventing bitumen from oxidizing and becoming brittle. Another benefit of applying sealcoat is that they dry within three to four hours.
Overlaying
Overlaying asphalt is a way of extending the life of existing pavements without completely tearing them out. This process can add several years of useful service without detracting from aesthetics or functionality. The cost of overlays may offset the savings made by not replacing the original pavement. However, proper application can prolong the life of a pavement up to fifteen years. Here are some of the advantages of asphalt overlays. These benefits make this maintenance strategy a great option for a wide variety of applications.
Overlays are only applicable over existing asphalt. This means that you'll have to take a few measures before laying the asphalt overlay. Root damage, huge potholes, and other types of damage that can't be fixed by overlaying will require tearing the structure apart. Poor drainage also makes it difficult to apply an asphalt overlay. In such cases, the surface must be graded to allow water to drain away easily. Asphalt milling is another option, which is a method of removing the damaged upper layer of asphalt to allow for an overlay to be applied.
Asphalt Paving in Texas City
Asphalt paving is one of the most commonly used forms of construction today. This is due to its high adaptability and low cost. In addition, it is also considered to be a very practical option when it comes to home paving. However, it does have certain shortcomings that need to be taken note of. Read on to know about some of these and consider whether you should opt for asphalt or not.
One of the disadvantages of using an asphalt driveway is that it can be quite slippery. You need to make sure, therefore, that you drive your car carefully on it. And even if you do so, there is still a chance of your vehicle getting stuck on the asphalt. So, you should keep a good grip on the steering wheel and use all the available help you can. This is especially important if you are making a long-distance drive.
There is also a possibility that asphalt might damage the surface underneath if it is not properly sealed. This is because asphalt is a petroleum product and petroleum products can cause damage to the environment. Therefore, you should make sure that the paved area is adequately sealed to make sure that it does not erode.
It is also important to remember that asphalt can crack when it gets too wet. If this happens, you will need to replace the area with new asphalt so that it does not get cracked again in future. Otherwise, you may end up spending more on repairing cracks that you have caused. In fact, asphalt cracks can be a real headache especially during heavy rains when the paver becomes very susceptible to water penetration.
Apart from this, asphalt is also susceptible to cracking when it is exposed to heat. This is especially true during summer months when the temperature is high. During this period, it is possible for the asphalt to get very soft and mushy. When this happens, it is much harder to seal the surface properly and repair any cracks that have developed.
Another problem that can occur with an asphalt paver is when it is being used improperly. For instance, when the asphalt paver is being used to pave driveways, it can easily grind over the edges of the driveway. The grout lines might also get damaged during this process. In fact, there are some homeowners who prefer using concrete or paved paths in front of their homes and driveways. However, they often forget that they should also seal these paths. Sealing the pathways will help to keep them protected from debris, grit, water and sand.
Homeowners should therefore find a qualified company to clean up their asphalt paver once in a while. These professionals will use a pressure washer to remove all the dirt and debris that have built up on the paver. They will then use a power washer to completely clean the water surface. After this is done, you can simply have the surfaces sealed and maintained by your local company.
By hiring a company to perform regular maintenance on your asphalt paver, you will be able to prevent some very common problems. For instance, if you find that the pavers have cracks, you can ask your local maintenance company to repair these cracks before they become larger. You can also ask them to apply new asphalt once a year. If you forget to do this, the asphalt will eventually wear out and begin to crack again. By properly maintaining your asphalt paver, you will be able to save yourself money in the long run because you will not have to call maintenance on a regular basis.
Asphalt Subgrade Preparation in Texas City
Asphalt Subgrade Preparation is the process of prepping a base course for construction of an asphalt pavement or overlay. This preparation is critical to any successful pavement project; the subgrade should be free from topsoil and vegetation, well compacted, and capable of supporting proposed loads; furthermore, it should also be graded according to specified elevation and slope. Without these specifications in place, top layers of pavement may shift or crack due to inadequate subgrade support.
Evaluation and Structural Support
It is essential to evaluate the subgrade to ensure it can support proposed traffic loads without deformation or collapse. If any issues arise, these should be repaired or replaced prior to beginning paving work. Furthermore, if there are contaminants such as soil or other materials present, these substances should be removed before beginning asphalt paving work.
Subgrade should be prepared to the width and elevation of the pavement or base plus two feet on either side (Figure 1). Furthermore, the surface should be smoothed and compacted into a uniform level in order to protect it from heavy vehicles or potential trips hazards. Moreover, use an approved herbicide on the subgrade in order to prevent or at least slow vegetation growth.
Pavement Overlays: Pavement overlays are a common type of roadway paving today. They typically sit over existing asphalt pavements to improve their aesthetic, durability and performance. Pavement Overlays can be created from either one layer of asphalt emulsion or from an aggregate-bituminous mixture known as maintenance mix that contains aggregate and bitumen.
Additionally, several techniques can be employed to reduce reflective cracking and other surface imperfections in new HMA pavements. These include grading, repairing, removing or filling cracks in the existing asphalt pavement; additionally, they involve creating a crack-relief layer over this same pavement to minimize reflective cracking caused by movement beneath it.
Fine-Grading and Filling
Once the subgrade has been graded to match the construction plan elevation, final grading should be done to closely replicate it. Elevation discrepancies should not be compensated for by varying HMA, PCC or aggregate thickness as (1) these materials are more costly than subgrade and (2) HMA compacts differently - thicker areas compact more than thinner ones), leading to final pavement smoothness issues due to subgrade elevation discrepancies.
Once the fine-grading is complete, it should be filled with a stabilizing or sealing mixture to protect the subgrade from weathering, stabilize the fines, preserve them for future pavement layers and promote bonding between them.
Binders such as lime, portland cement or emulsified asphalt can be added to the subgrade in order to increase its stiffness or reduce swelling tendencies. Furthermore, adding an appropriate binder increases the load-bearing capacity of the subgrade.
Oil Spills and Debris: Petroleum spills such as gasoline, diesel fuel, oil or gas can lead to premature pavement failure. They leave residue on the asphalt surface which dissolves the bonds holding together the pavement. It is essential that these spills be cleaned up promptly in order to prevent further deterioration and water seepage into the subgrade.
Commercial Asphalt Paving in Texas City
Asphalt is a robust material that can withstand intense traffic and weathering. This makes it the ideal choice for commercial properties like parking lots or roads, plus, it can be recycled - making it eco-friendly.
How to Choose a Contractor for Commercial Asphalt Paving
Paving is the process of applying asphalt on roads or parking lots to enhance their aesthetic and functionality. Commercial asphalt paving provides businesses with a cost-effective way to beautify their property while creating an inviting atmosphere for guests and customers alike.
Maintaining your pool can extend its life expectancy exponentially if done properly.
Asphalt is not just for road and parking lot paving; it can actually be utilized in many outdoor projects like walkways, patios, sports complexes and more.
When planning a new project for your business, it's essential to locate the ideal paving contractor. This will guarantee that the job is done correctly, and you receive maximum value from your investment.
When selecting a contractor, the most essential factor to consider is their experience installing commercial asphalt pavement. This way, you can be certain they'll be able to meet all of your needs.
Another factor to consider is whether they provide maintenance services for your paved surfaces. If so, then you should be able to create an arrangement for regular inspections and repairs.
A reliable commercial paving company will have extensive knowledge of maintaining asphalt surfaces and can suggest the most effective methods for keeping them in excellent condition.
They should be able to take care of any drainage problems, edge support needs, or parking lot sealing needs you may have. They should provide you with an estimate for all required work and answer any queries that you may have.
Drainage is one of the most essential elements in paver installation. If done incorrectly, it can lead to problems with your surfaces and result in expensive repair bills.
Your paving materials are highly vulnerable to water, so it's essential that you have proper drainage in place. Otherwise, you could face a range of issues including puddles and potholes which pose a safety hazard for both customers and vehicles alike.
Drainage can make your asphalt pavement more resistant to environmental elements and help you save money on costly maintenance repairs in the future. Furthermore, proper drainage helps shield your pavement from cracking, sagging or fading.
Maintaining your paved surfaces on a regular basis can be extremely beneficial. This could include sweeping away any debris and patching up small cracks.
A professional paving company can create a maintenance schedule tailored to your surfaces.
When you're ready to add some flair to your property, reach out to a reliable commercial paving company like Lyons & Hohl Paving for more details about their services.
Commercial Repair in Texas City
When potential customers arrive at your business, the first impression they get of your establishment is always the parking lot. Whether it is a single lot or multiple ones, your asphalt pavement should be at the forefront of all maintenance and repair strategies.
Maintaining your commercial asphalt with proper commercial asphalt maintenance is the best way to extend its life and keep it looking its best. Aside from enjoying the aesthetic benefits of a well-kept surface, investing in proper maintenance can save you tens of thousands of dollars over time.
Crack Sealing - One of the most essential steps for maintaining your asphalt is properly sealing all cracks on the surface. Doing this helps reduce water penetration into the sublayer beneath your pavement, potentially leading to destruction. That is why having quality crack sealing done regularly is so essential.
Hot Mix & Crack Repair - Hot rubberized crack sealants are a commonly used approach to crack repairs. This provides for long-lasting solutions that won't fail like cold patch or other non-hot rubberized crack sealants.
We can also use a hot rubberized sealant to repair potholes and any other areas damaged due to water penetration. This is particularly effective for patching up asphalt pavement that has already begun to deteriorate.
Our crews are highly-experienced in fixing potholes and other damages caused by water-logged pavement, sun damage, traffic accidents, improper asphalt construction and freezing/thawing cycles. When filling in potholes, we make sure to clear out all debris that has built up within the asphalt and its surrounding concrete.
After cleaning the cracks, we then seal them with a commercial-grade hot rubberized crack sealant that won't melt away and damage your asphalt sublayer. This solution provides long-lasting, seamless repairs for your asphalt surface.
Milling & Resurfacing - If your asphalt has minor to moderately damaged, another option is to mill away the top layers and replace them with new pavement. Not only will this restore its aesthetic value, but also help extend its life expectancy by shielding it from UV rays and petrochemicals.
For severe cases of asphalt damage, replacing the entire surface may be recommended. While this option is more costly than patching or resurfacing, it will provide your parking lot with a fresh new look and feel.
In addition to the initial cost of replacing your asphalt, there are other expenses involved with this project. These include labor expenses for preparation and removal of the old pavement, as well as materials required for installation of the new pavement.
Concrete Driveway Services in Texas City
If you're considering a new driveway for your home or business or are in need of repair services for your current driveway, this article is for you. We will cover deciding on a new color or texture, curing your concrete, and more. Read on to learn more about concrete driveway services. And, if you are ready to go for a makeover, contact a professional today! You will be glad you did!
Installing a new driveway
There are a few different steps to installing a new concrete driveway. There are certain basic requirements that must be followed to avoid a faulty installation. First, the driveway must be at least 4" thick throughout. It should also be of the same thickness, so that any variations are minimal. Once that's completed, the driveway must be allowed to cure for at least a day. To prevent this, you should avoid placing heavy vehicles on it.
The concrete pour itself is a great learning experience for children. You can let them watch from a safe distance, but keep in mind that once the concrete has set, it becomes a magnet for kids. Children will love to write on it or ride their bikes through it. To avoid this, put a child on "guard duty" while the contractor is working. Otherwise, they will probably get hurt! Once the concrete has been poured, it will become a magnet for children, so make sure you have a few sitters around to supervise the kids while they're playing.
Repairing a damaged driveway
The most common problem when repairing a concrete driveway is the presence of stains, potholes, or cracks. Luckily, there are several repair options available. Some of them involve grinding down the top layer of concrete and adding a new one. While this option can solve minor problems, it can also delay a larger repair job. A driveway contractor can evaluate the damage and suggest an appropriate repair solution. Read on to learn more.
If the damaged concrete driveway has deteriorated to the point where it is not structurally sound, it may be best to replace it. This method requires careful planning and is not recommended for homeowners who are not skilled in concrete repair. The method chosen will depend on the size of the damage and the design of the concrete driveway. If it is difficult to complete the project, it is a good idea to seek the services of a professional driveway repair contractor.
Deciding on a new color or texture
One of the most important steps when choosing a concrete driveway is deciding on the color or texture. When considering the color of your concrete, consider the amount of traffic it will receive, the type of surface preparation, and the climate. For a luxurious look, consider a marbleized concrete driveway or a custom-stained driveway. Regardless of the type of texture, it will add a luxurious look to your home and increase the value of your property.
Colors are used to enhance the pattern and texture of the concrete. Many different color materials are used to achieve different effects. Choose from integral colors, acid stains, water-based stains, color hardeners, and antique releases to create a custom color surface. Samples of the color you'd like will help you decide whether it will work best for your driveway. However, make sure to ask about the process and costs before making a final decision.
Curing a concrete driveway
If you want a durable driveway, you should consider curing the concrete properly. This process occurs after the concrete is placed in its forms. The forms protect the concrete from exposure to the air, which prevents it from drying too quickly. However, it is possible to cure the concrete more quickly than is recommended by most contractors. Here are some tips to follow when curing a concrete driveway. Listed below are the steps you should take to ensure a quality driveway.
The first step is to wait a few days before applying a sealant to the newly poured concrete. You should wait for at least a month before driving a vehicle on the newly installed concrete. This will prevent excess moisture from evaporating and cause the concrete to crack and become uneven. To help speed up the curing process, hire a professional concrete driveway contractor to help you. Depending on the type of concrete, the curing process can take from a few days to a month.
Concrete Parking Lot Construction in Texas City
Concrete parking lot construction is the process of creating concrete pavements for commercial, industrial, and institutional uses. These structures are usually designed to offer a long-lasting parking surface that resists damage caused by vehicle and pedestrian traffic as well as impact loads on the subgrade beneath.
For the design of a parking lot, it is necessary to analyze the soils beneath the structure and identify and assess any potential issues related to subgrade conditions like groundwater contamination or high-volume change soils that could negatively affect pavement performance. Furthermore, an accurate assessment of average daily truck traffic (ADTT) should be made for each facility being utilized.
Once the site investigation is complete, a geotechnical specialist should be hired to create an investigation report based on the collected information. This report should then be given to the contractor for review and approval prior to construction of the concrete parking lot.
It is recommended that the site investigation report be supplemented with a transmittal letter outlining recommended concrete thicknesses based on accepted engineering practices for expected loads. These recommendations will be determined based on the soil investigation results, average daily truck traffic (ADTT), and design flexural strength or modulus of rupture (MR) of the concrete.
In addition to specifying the required thickness of concrete for a given project, quality control testing of the concrete should also be done in order to guarantee its strength meets requirements. This can be done by an accredited field testing technician certified through ACI's Field Testing Technician - Grade I Certification Program or equivalent program.
According to the project urgency and need for quality assurance, compressive strength tests may be preferred over flexural strength tests when evaluating concrete. This decision is made based on three reasons:
Compressive strength testing is typically more cost-effective than flexural strength testing, and it's more accessible and easily interpretable by contractors than flexural testing.
Second, a compressive strength test will enable the contractor to confirm that their concrete has been thoroughly mixed and compacted, helping prevent any cracking that could arise during construction.
Third, a compressive strength test will also give the contractor assurance that their concrete has fully cured. Curing is essential to ensure maximum strength and prevent delamination due to air infiltration which could make the surface become hazardously slippery.
Fourth, a quality sealer is necessary to shield concrete surfaces from stains, corrosion and freeze-thaw cycles. This can be accomplished using a water-based, low VOC acrylic-based sealant.
Fifth, concrete pavement should be reinforced with evenly spaced control joints to reduce transverse and longitudinal cracking.
Concrete is an ideal choice for parking lot construction as it reflects three times more sunlight than asphalt, making it safer and easier to see at night. Furthermore, concrete has greater durability and a longer life span - meaning you save money in the long run with concrete parking lot construction.
Concrete Paving in Texas City
Concrete paving is one of the most common options to beautify a concrete driveway. It can be done in a variety of different colours and designs, such as bricks, stones, or even a unique design in a circle. In general, concrete paving is used for driveways, sidewalks, patios, and any other place where you would need to have something that will help you walk safely on your driveway or that will keep your car from sliding or tipping over. Concrete paver jobs are usually fairly easy to get, but there are a few things that you should know before you start. This article will take a look at some of the advantages of getting concrete paving, as well as some of the things that you will need to do before the job is complete.
If you are trying to decide whether this type of paving is right for you, it can be a good idea to ask to have a professional give you a look. You will be able to see if the job done looks good and if there are any problems that you might have missed if you attempted it yourself. A lot of contractors will be glad to come to your home and look at your driveway and give you an opinion on whether or not it is a good idea, which will be unbiased and based on their own experience.
There are many different kinds of concrete paver options available, so you will need to consider what kind of material you want to use when doing your paving. For instance, stone pavers are usually best suited for driveways and paths, as they are more durable than many other types of concrete. In addition, they are also usually quite beautiful. Pavers are a little bit more expensive than some others, but you are likely to have them for many years, with little maintenance required. If you are looking for a simpler option, concrete is a great choice. Concrete is relatively cheap to buy and easy to work with, while also being very strong and non-slip.
The other problem with concrete paving is that it does take a lot of effort to keep it looking nice. There will be layers of loose soil that needs to be dealt with, along with adding compacted soil to the beds as they are built up. All of this adds to the cost of labor, and the final product. If you really want a good looking driveway that requires little effort to maintain, then stone pavers would be a better option. They are more expensive initially, but will last longer, are not affected by the elements like soil compaction and others, and can even be carved into to create ornate designs.
Some people choose concrete paver technology because they think it will make their driveways stand out more. This does not really have anything to do with aesthetics, but is more about making the most of your space. Pavers are put in driveways because they create the right amount of traction, keeping the car down. If you have a straight driveway without obstacles, then the pavers may not be necessary, but for curves, or small areas that you want to have things break into, they can be very helpful.
Concrete paving does need to be done regularly, or you will find that it is not very attractive. As the material sets, tiny air pockets will form, which look a little like bubbles. These should be filled up with water as soon as they form. Once this has been done, you will begin to see a difference in your driveway. It will no longer be as slippery and will have a nice smooth and uniform appearance.
When deciding on concrete paver technology, you should consider your budget as well. There are several types of paver systems that are used for both residential and commercial applications. Some people prefer a more environmentally friendly product, which will be created using recycled materials. You should also think about whether you need a concrete paver for your driveway, or if you need the driveway done only for walkways. If there is not much traffic going through your driveway, then you don't need to make it as beautiful as if it were a major thoroughfare.
In the end, choosing concrete paving will depend on the look you want your driveway or sidewalk to have. Concrete pavers will help you get the perfect look for your home or business. Once you decide to invest in this type of water system, you will soon notice a difference in the appearance of your property.
Concrete Repair in Texas City
Every building material has a potential weakness: Wood rots, metal corrodes and concrete cracks. However, unlike rotting wood or corrosiond metal, sound structures with only surface damage such as cracks can usually be repaired back to like-new condition.
First and foremost, identify the issue. This involves pinpointing its cause, significance and location before deciding how best to repair it.
Based on the cause of the issue, different repair methods may be required, and this depends on the structural integrity of the structure. It also involves assessing how much work needs to be done in order to bring back the structure back to its original condition.
When fixing a crack in concrete, the following steps are recommended: Remove damaged material and any debris around the area to be repaired. Use either a heavy-duty trowel or cold chisel to break up any loose concrete, then sweep with either a brush or broom to ensure all dust and particles have been eliminated.
If the area being repaired is larger than 2 inches thick, a bonding agent may be required to help the concrete stick together. On the other hand, some repair materials don't need this step for effective results.
Establish the Severity of a Concrete Crack: Assessing the severity of a crack is essential in deciding the most suitable and effective repair option for a given structure. Generally, small or fine cracks that measure less than 0.3 mm in width do not need to be addressed, but when they widen into structural issues, they could compromise the stability of your foundation.
In such cases, it's essential to identify the causes of cracking and any design or construction errors that may have contributed to it. Once this information has been gathered, a professional concrete inspector can assess how severe the issue truly is.
Utilizing a Repair Mortar: There are various types of repair mortars to choose from, so the right one for your repair depends on its scope and purpose. Some can be applied horizontally or vertically while others are ideal for filling and covering large cracks.
What type of concrete repair you need depends on what product is necessary. For instance, if the damage is only minor, then opt for a product that's easy to pour and level into an open hole or spot. Ideally, look for ready-to-pour or bottle/tub options.
Consider Your Experience with Repairs:
As either a novice or experienced concrete contractor, it is essential to have an in-depth understanding of the repairs required and what needs to be done. Doing this will guarantee the best possible outcome and help you avoid costly errors when repairing concrete.
Paving in Texas City
Asphalt paving is one of the most commonly used forms of construction today. This is due to its high adaptability and low cost. In addition, it is also considered to be a very practical option when it comes to home paving. However, it does have certain shortcomings that need to be taken note of. Read on to know about some of these and consider whether you should opt for asphalt or not.
One of the disadvantages of using an asphalt driveway is that it can be quite slippery. You need to make sure, therefore, that you drive your car carefully on it. And even if you do so, there is still a chance of your vehicle getting stuck on the asphalt. So, you should keep a good grip on the steering wheel and use all the available help you can. This is especially important if you are making a long-distance drive.
There is also a possibility that asphalt might damage the surface underneath if it is not properly sealed. This is because asphalt is a petroleum product and petroleum products can cause damage to the environment. Therefore, you should make sure that the paved area is adequately sealed to make sure that it does not erode.
It is also important to remember that asphalt can crack when it gets too wet. If this happens, you will need to replace the area with new asphalt so that it does not get cracked again in future. Otherwise, you may end up spending more on repairing cracks that you have caused. In fact, asphalt cracks can be a real headache especially during heavy rains when the paver becomes very susceptible to water penetration.
Apart from this, asphalt is also susceptible to cracking when it is exposed to heat. This is especially true during summer months when the temperature is high. During this period, it is possible for the asphalt to get very soft and mushy. When this happens, it is much harder to seal the surface properly and repair any cracks that have developed.
Another problem that can occur with an asphalt paver is when it is being used improperly. For instance, when the asphalt paver is being used to pave driveways, it can easily grind over the edges of the driveway. The grout lines might also get damaged during this process. In fact, there are some homeowners who prefer using concrete or paved paths in front of their homes and driveways. However, they often forget that they should also seal these paths. Sealing the pathways will help to keep them protected from debris, grit, water and sand.
Homeowners should therefore find a qualified company to clean up their asphalt paver once in a while. These professionals will use a pressure washer to remove all the dirt and debris that have built up on the paver. They will then use a power washer to completely clean the water surface. After this is done, you can simply have the surfaces sealed and maintained by your local company.
By hiring a company to perform regular maintenance on your asphalt paver, you will be able to prevent some very common problems. For instance, if you find that the pavers have cracks, you can ask your local maintenance company to repair these cracks before they become larger. You can also ask them to apply new asphalt once a year. If you forget to do this, the asphalt will eventually wear out and begin to crack again. By properly maintaining your asphalt paver, you will be able to save yourself money in the long run because you will not have to call maintenance on a regular basis.
Paving Company in Texas City
What to Look for in an Asphalt Paving Contractor
Countryside Paving Company has been in the business of paving for over two decades. The business has a strong commitment to customer satisfaction and a long-standing commitment to excellence. The Company offers many different types of paving services including, driveway paving, walkway paving, sidewalk paving, slab paving, decorative paving, and much more. This company is able to offer these different services because they have many qualified and experienced employees. Most of the employees are unionized, which is one of the main reasons that this company is able to offer some of these paving services at an affordable price. They are also able to offer these services because most of their labor is unionized, this is why you will notice that their employees talk to you as one of the family and not just as another worker.
If you need some commercial paving services, then you can expect to have the work done quickly and efficiently. One of the major reasons that this company can provide you with great commercial paving services is because they are fully stocked with the tools and materials needed to complete your project. By having a full stock of all of the materials that you need to get the job done, you will be able to save a lot of money and time. Because the majority of the paving job requires a concrete base, this is another reason why the commercial paving company is able to keep prices low because they are able to buy these materials in large quantities. They are also able to pass these savings on to you by charging you a low price for the job.
Another reason why you should use a reputable paving company is because they specialize in all types of jobs. For example, if you are paving a parking lot, then you might want to use a paving contractor that specializes in asphalt surfaces. Parking lots are usually the most popular type of pavement job that you will find that a paving company takes on. There are a number of different things that you will need to consider when choosing a paving company to take on this job for you, but the most important consideration will be the quality of the job that you will get.
If you want to choose the best paving contractor possible for your paving needs, then you will need to make sure that you spend some time checking out different companies that offer this service. Some of the things that you will want to look for include the experience of the paving contractor. A good way to determine whether or not this is the case is to ask for references from previous clients. If you find a paving contractor that has a lot of good references, then you will want to consider hiring that contractor for your commercial paving needs. It is always best to choose a good contractor who has a lot of positive references rather than one that has a lot of poor references.
Another thing to consider is the level of skill and knowledge that a paving company has when it comes to working on an asphalt surface. You should check out the paving contractor's portfolio to see if they know what they are doing when it comes to working on asphalt surfaces. Some of the best companies in the business have been doing paving work for a long time and they have a lot of experience. It is important to know that the job that you are going to be getting done will be done right the first time around. If you have any doubts about the ability of a paving company to handle a certain type of asphalt surface, then you will want to choose another company to do your asphalt surface paving.
The last thing that you will want to consider before choosing a paving company is their longevity. It is important to choose a paving company that can stay in business for at least three generations. If you are trying to save a few bucks, you will want to look for a paving company that does not have a lot of experience. The good news is that there are many paving companies that are willing to stay in business for more than three generations. If you are trying to cut costs, however, you will want to choose a paving company that is experienced and one that offers good customer service. If a paving company cannot make an accurate estimate or provide specific information about the cost of your project within three days, then you may want to hire a different company.
If you are trying to find a paving company that can get the job done within three generations, you will need to ask them about their track record. The last thing that you want to do is hire a commercial paving contractor that is not very experienced. A good commercial paving contractor will help you to create the best-looking commercial driveway that you can possibly imagine. They will also make sure that the driveway is not only well marked but that it is properly laid and organized as well. The last thing that you want to do is hire a paving company that makes a mistake during the installation of the asphalt paving contractor.
Asphalt paving is an easy task to complete but it does require a lot of expertise. Before you hire any company, it will be important to ask them about the amount of experience that they have with asphalt paving. Any paving company should be able to provide you with a list of references that they have supplied to previous customers. You can also request to see a proof of insurance or a business license if you feel that the company does not have the proper licensing to carry out the kind of work that they are doing.
Sign Installation in Texas City
Sign Installation involves mounting a sign to its intended location. Signs can't be held up by hand; they must be mounted to a wall or other structure to keep the message visible. The material used for the sign is also an important consideration as it should last as long as possible. If the material is too flimsy, it will easily rot and blow away in the wind.
Properly installing a sign requires the use of cranes and the expertise of a sign expert. Without a professional, a sign could become dangerous and the installation could void the manufacturer's warranty. Moreover, improper installation can lead to electrical and lighting problems. In addition, many signs require permits and inspections. Professional sign installation companies can request these permits for you.
It is advisable to work with a sign installation company local to you. Local sign companies know how to install signs properly and can often offer affordable maintenance plans. This allows you to establish a good working relationship with the sign installation company. A local company will also be familiar with your locality and understand the needs and preferences of your customers.
For sign installation, a qualified sign installer should have at least two years of experience and a commercial driver's license. They must also be physically fit and possess a clean driving record. They must also have a working knowledge of the various types of signs. They should also have good organizational skills and be able to follow instructions.
Site Construction in Texas City
Site construction is the process of preparing the ground for the construction of a building or structure. It includes a number of different tasks, including clearing the site, excavating, and grading. It also involves putting in drainage and piping for sewer and water lines.
The Importance of Site Construction
It’s important to prepare the site properly if you want your new building to last for many years. A good sitework contractor starts by clearing the space of debris and brush to ensure that it’s level. They then compact the soil and do fine grading work to create a solid foundation for the rest of the project.
The Site Sketch is a vital part of the planning stage for any building project. It helps real estate developers and local municipal officials determine whether or not the project is feasible. It includes a rough layout of the entire construction site. It's a great way to get everyone on the same page about the proposed design.
Once a site sketch is approved, the project can move forward. A civil engineer will take the drawing and create a detailed plan that captures major elements of site construction, including drainage, utilities, and sitework.
Having a site sketch in hand when it comes time to bid on the project will save you a lot of time and money down the road. It can also help you avoid a lot of hassles by making sure that the project doesn’t go over budget.
A good sitework contractor will have all of the necessary equipment to complete these jobs efficiently and safely. They will also be able to provide you with the information you need about how much the job will cost and how long it will take to complete.
Construction Sites Are Dangerous
A construction site is a place where many people gather and work together. It is very important to ensure that all workers are safe at all times, as they are working with heavy machinery and potentially dangerous materials. Several safety measures can help ensure that the site is safe, including proper signage and the installation of emergency kits and first aid supplies.
These measures can be expensive, but they are well worth it. They can prevent accidents and injuries and can reduce the costs associated with lost productivity due to illness or injury.
The cost of sitework is not just a one-time expense; it's something that should be budgeted for on a regular basis as you build your home or office. It's an investment in your property that will pay off for years to come.
There are a variety of different sites that you can purchase for your construction project. These can range in price depending on the location and the type of building you're planning to build.
Some sites are more expensive than others, so it's important to do your research and find the right place for you. You'll want to consider factors like traffic flow, the view from your front door, and the quality of the soil in the area.
Traffic Control in Texas City
Traffic Control is an important function of road safety. This task involves directing traffic around construction zones, accidents and road disruptions, so that emergency responders, construction workers and the general public are safe. Whether the work is small or large, traffic control is crucial for the safety of those on the road. Here's a look at how traffic control works.
Traffic lights are an important component of traffic control. When the light is red, a vehicle may be prohibited from proceeding. When it is green, another vehicle can proceed. The lights also allow other traffic to cross. These controls are effective in helping keep everyone safe. Often, these lights are used at intersections where heavy traffic is prevalent.
Another critical function of traffic control is the safe movement of people and goods. The safety of the traveler and other vehicles is an essential consideration, whether it is an automobile or an airline pilot. Traffic control systems are used to prevent accidents, as well as warn drivers about dangerous curves and other conditions. A major problem facing traffic controllers is fatigue. Many of them are tired and irritable. Some of them are using cell phones or other forms of antisocial behavior. Others are tired from working night shifts. Ultimately, their primary goal is the efficient movement of people and goods.
Traffic control systems have a long history. In the early days, they were pretimed and did not have much flexibility. This limited their effectiveness in predicting traffic patterns, which required a lot of data gathering. Most agencies were cautious about changing timing. Eventually, they began to experiment with traffic-actuated local controllers (TCACs) using pressure detectors. This method was not suitable for larger intersections.
About Texas City
Texas City is a city in Galveston County in the U.S. state of Texas. Located on the southwest shoreline of Galveston Bay, Texas City is a busy deepwater port on Texas's Gulf Coast, as well as a petroleum-refining and petrochemical-manufacturing center. The population was 51,898 at the 2020 census, making it the third-largest city in Galveston County, behind League City and Galveston. It is a part of the Houston metropolitan area. The city is notable as the site of a major explosion in 1947 that demolished the port and much of the city.
Three duck hunters in 1891 noted that a location along Galveston Bay, known locally as Shoal Point, had the potential to become a major port. Shoal Point had existed since the 1830s, when veterans of the Texas Revolution (1835–1836) were awarded land for their services. The name was applied to the community when a post office opened in 1878. The duck hunters were three brothers from Duluth, Minnesota, named Benjamin, Henry, and Jacob Myers. After they returned to Duluth, they formed the Myers Brothers syndicate, convinced other investors to put up money to buy 10,000 acres (4,000 hectares) of Galveston Bay frontage, including Shoal Point. They renamed the area Texas City.
By 1893, the investors had formed the Texas City Improvement Company (TCIC), which plotted and filed the townsite plan. A post office opened in 1893 with Frank B. Davison appointed as the town's first postmaster, to serve about 250 people who had moved there from Minnesota and Michigan. TCIC also received permission from the federal government to dredge an eight-foot channel in the bay from Bolivar Roads (at the east end of Galveston Island) to serve Texas City. In 1894, the channel was first used commercially. TCIC eventually dredged the channel to a 40-foot depth and extended the length of the port to 1.5 mi. TCIC also built a 4-mi railroad to the Texas City Junction south of town, where it connected to two other rail lines: Galveston, Houston and San Antonio and Galveston-Houston and Henderson. Despite these successes, the TCIC went bankrupt in 1897. Its assets were reorganized into two new companies: Texas City Company (TCC), and Texas City Railway Terminal Company (TCRTC). TCC acquired 3,000 city lots and provided water, gas, and electricity to the town. TCRTC operated the railroad. These companies were chartered on February 4, 1899.
A grid of streets and avenues was laid out during the 1890s, and houses and other structures began to appear. The Davison Home, where the first childbirth in the town took place, was constructed between 1895 and 1897. As the TCIC, the TCC, and TCRTC expanded, urbanization expanded.
Permission was granted in the summer of 1900 to dredge the Texas City channel to a depth of 25 ft. The disastrous Galveston Hurricane of 1900 interrupted the project, washing the dredge ashore. However, the Texas City port remained open after the storm passed. Even before the channel dredging was complete, the first ocean-going ship, SS Piqua, arrived at the port from Mexico on September 28, 1904. Dredging was completed March 19, 1905, when the US government opened a customs house in Texas City. Port growth progressed rapidly after this, from 12 ships in 1904, to 239 in 1910.
Texas City Refining Company was chartered in 1908 to build a refinery adjacent to the port facility. For several years, it was the only Texas refinery capable of producing the byproducts wax and lubricating oil. This facility was later acquired and expanded by Texas oilman Sid Richardson. Three more refineries soon followed, making Texas City a major port for deepwater shipping of Texas petroleum products to the Atlantic Coast.
Texas City incorporated in 1911 with a mayor and commission form of government. It held its first mayoral election on September 16, choosing William P. Tarpey as mayor.
The 2nd Division of the United States Army deployed to Texas City in 1913 to guard the Gulf Coast from incursions during the Mexican Revolution, essentially encamping nearly half of the nation's land military personnel there, due to the perceived double threat that the Mexican Revolution might spill over across the border or that the neighboring country might become a German ally in the incipient World War.
The military deployment also included the 1st Aero Division, and the Wright brothers trained over a dozen soldiers as military pilots, essentially turning Texas City into the birthplace of what became the United States Air Force, as the city claims at its monument of the birthplace of the Air Force at Bay Street City Park. Speed and distance records were set by pilots trained and planes flying out of Texas City's impromptu military air base.
An August 1915 hurricane completely demolished the encampment. Nine soldiers were killed. Military leaders promptly moved the camp to San Antonio.
In 1921, the Texas City Railway Terminal Company took over operations of the port facilities. Hugh B. Moore was named president of the company and began an ambitious program of expansions. He was credited with attracting a sugar refinery, a fig processing plant, a gasoline cracking plant, and a grain elevator. Also, more warehouses and tank farms were built to support this growth. By 1925, Texas City had an estimated population of 3,500 and was a thriving community with two refineries producing gasoline, the Texas City Sugar Refinery, two cotton compressing facilities, and even passenger bus service.
The Great Depression and competition caused the sugar refinery to fail in 1930. Economic hard times afflicted the city for a few years until the oil business returned to expansion. Republic Oil Refinery opened a gasoline refinery in 1931. In 1934, Pan American Refinery (a subsidiary of Standard Oil Company of Indiana) began operating. Moore was able to win this refinery from the Houston Ship Channel because of Texas City's location nearer the Gulf of Mexico. By the end of the 1930s, Texas City's population had grown to 5,200.
Seatrain Lines constructed a terminal at the Texas City port during 1939–1940. This was a specialized company that owned ships designed to carry railroad cars from Texas City to New York City on a weekly schedule. By 1940, Texas City was the fourth-ranked Texas port, exceeded only by Houston, Beaumont, and Port Arthur.
Texas City is home to the Texas City Dike, a man-made breakwater built of tumbled granite blocks in the 1930s, that was originally designed to protect the lower Houston Ship Channel from silting. The dike, famous among locals as being "the world's longest man-made fishing pier", extends roughly 5.2 mi (8 km) to the southeast into the mouth of Galveston Bay.
Prosperity and industrial expansion returned as the United States became more involved in World War II. Enemy submarines had almost completely stopped the shipment of petroleum products to friendly countries from the Middle East, South America, and Southeast Asia. Texas City refineries and chemical plants worked around the clock at full capacity to supply the war effort. Realizing that all of the world's tin smelters could no longer supply the US demand, Jesse H. Jones, head of the Defense Plant Corporation, decided to build the Texas City tin smelter. The government also funded construction of a petrochemical plant to make styrene monomer, a vital raw material for synthetic rubber. Monsanto Chemical Company contracted to operate the facility, which became the nucleus of an even larger petrochemical complex after the war. By 1950, the local population had reached 16,620.
The postwar prosperity was interrupted on the morning of April 16, 1947, when the French ship Grandcamp, containing ammonium nitrate fertilizer, exploded, initiating what is generally regarded as the worst industrial accident in United States history, the Texas City disaster. The fertilizer manufactured in Nebraska and Iowa was already overheating when stored at the Texas City docks. The blast devastated the Monsanto plant and offices, which were immediately across the slip from the Grandcamp, blew away the warehouses, showered shrapnel from the ship in all directions, and ignited a second ship, the S.S.High Flyer, docked at an adjacent slip. Released from its mooring by the blast, the High Flyer rammed a third ship, SS Wilson B. Keene, docked across the slip. Both ships also carried ammonium nitrate fertilizer and were ablaze. They, too, exploded. In all, the explosions killed 581 and injured over 5,000 people. The explosions were so powerful and intense that many of the bodies of the emergency workers who responded to the initial explosion were never accounted for. The entire Texas City and Port Terminal Fire departments were wiped out.
The steel-reinforced concrete grain elevator was pockmarked with shrapnel and the drive shaft of the Grandcamp was embedded in the headhouse. The ship's anchor was hurled several miles away, where it was discovered embedded in the ground at the PanAmerican refinery. School children and townspeople who were attracted to the smoke also died, and entire blocks of homes near the port were destroyed. People in Galveston 14 miles (23 km) away were knocked to their knees. Surrounding chemical and oil tanks and refineries were ignited by the blast. At least 63 who died and were not able to be identified are memorialized in a cemetery in the north part of town. The Texas City disaster is widely regarded as the foundation of disaster planning for the United States. Monsanto and other plants committed to rebuilding, and the city ultimately recovered quite well from the accident. Numerous petrochemical refineries are still located in the same port area of Texas City. The city has often referred to itself as "the town that would not die," a moniker whose accuracy would be tested once again in the days surrounding Hurricane Ike's assault on the region early on September 13, 2008.
On October 30, 1987, a crane at the Marathon Oil refinery accidentally dropped its load on a tank of liquid hydrogen fluoride, causing a release of 36,000 pounds (16,000 kg) of hydrogen fluoride gas and requiring 3,000 residents to be evacuated.
On March 23, 2005, the city suffered another explosion in a local BP (formerly Amoco) oil refinery which killed 15 and injured 180. In the U.S. Chemical Safety and Hazard Investigation Board (CSB)'s final report on the accident, published in March 2007, they described the event as "one of the worst industrial disasters in recent U.S. history." The BP facility in Texas City is the United States' third-largest oil refinery, employing over 2,000 people, processing 460,000 barrels (73,000 m³) of crude oil each day, and producing roughly 4% of the country's gasoline.
Even in the widespread destruction throughout Galveston County caused by the wind and surge associated with Ike, Texas City was largely spared the devastation that other low-lying areas suffered. Texas City is mostly surrounded by a 17-mile-long (27 km) levee system that was built in the early 1960s following the devastating floods from Hurricane Carla in 1961. Together with pump stations containing several Archimedes' screws located at various places throughout the northeast periphery of the city adjoining Galveston, Dollar Bay, and Moses Lake, the levee and pump station system may well have saved the city from wholesale devastation at the hands of Ike's powerful tidal surge. Damage in the city was largely limited to that caused by Ike's powerful winds and heavy rains.
Beginning Sunday, September 14, 2008, the day after landfall, Texas City's high school football complex, Stingaree Stadium, was used as a staging and relocation area for persons evacuated by National Guard Black Hawk helicopters from nearby bayfront communities such as the Bolivar Peninsula and Galveston Island. Also, by the morning of Monday, September 15, the American Red Cross had opened a relief and material distribution center in the city.
The Texas City Dike was overtopped by a greater than 12-foot (3.7 m) storm surge when Hurricane Ike barreled through the region in the early-morning hours of Saturday, September 13, 2008. Although all buildings, piers, and the Dike Road were destroyed, the dike itself weathered the storm. The dike was closed for three years while the road and supporting facilities were rebuilt. It was reopened to traffic in September 2011.
Texas City is located at 29°24′00″N 94°56′02″W / 29.399983°N 94.933851°W (29.399983, −94.933851). This is 10 miles (16 km) northwest of Galveston and 37 miles (60 km) southeast of Houston.
According to the United States Census Bureau, the city has a total area of 185.6 square miles (480.6 km), of which 63.8 square miles (165.2 km2) is land and 121.7 square miles (315.3 km), or 65.61%, is covered by water.
Officially, the elevation of Texas City is 10 feet above sea level, though some areas are even lower. It was naturally vulnerable to flooding by hurricane storm surges and heavy rainstorms.
The land south and west of the city is flat coastal plain. A large part of this area to the south is marshland. Texas City is bounded on the north by Moses Lake, which is fed by Moses Bayou, a freshwater stream. The lake drains into Galveston Bay, which bounds the city on the east.
As of the 2020 United States census, there were 51,898 people, 17,499 households, and 11,795 families residing in the city.
As of the census of 2000, 41,521 people, 15,479 households, and 10,974 families resided in the city. The population density was 665.7 inhabitants per square mile (257.0/km2). The 16,715 housing units averaged 268.0/sq mi (103.5/km). The racial makeup of the city was 60.75% White, 27.47% African American, 0.50% Native American, 0.88% Asian, 0.05% Pacific Islander, 8.23% from other races, and 2.12% from two or more races. Hispanics or Latinos of any race were 20.52% of the population.
Of the 15,479 households, 33.1% had children under the age of 18 living with them, 48.6% were married couples living together, 17.3% had a female householder with no husband present, and 29.1% were not families. About 24.8% of all households were made up of individuals, and 9.3% had someone living alone who was 65 years of age or older. The average household size was 2.62 and the average family size was 3.13.
In the city, the population was distributed as 26.7% under the age of 18, 9.6% from 18 to 24, 27.8% from 25 to 44, 22.4% from 45 to 64, and 13.4% who were 65 years of age or older. The median age was 36 years. For every 100 females, there were 89.4 males. For every 100 females age 18 and over, there were 84.7 males.
The median income for a household in the city was $35,963, and for a family was $42,393. Males had a median income of $36,463 versus $24,754 for females. The per capita income for the city was $17,057. About 12.0% of families and 14.9% of the population were below the poverty line, including 20.5% of those under age 18 and 11.2% of those aged 65 or over.
The Hispanic and Latino population's percentage of the overall population of Texas City had increased to 29.9% in 2017 from 27% in 2010, and by then the city had a Hispanic supermarket and other businesses catering to Hispanics. The African-American percentage had declined to 28% in 2017 from 30.8% in 2010.
The Texas City economy has long been based on heavy industry, particularly shipping at the Port of Texas City, as well as petroleum and petrochemical refining. The Texas City Industrial Complex is a leading center of the petrochemical industry. Within this complex, the Galveston Bay Refinery operated by Marathon is the second-largest petroleum refinery in Texas and third-largest in the United States. The Port of Texas City became the third-leading port in Texas by tonnage and ninth in the nation. In recent decades, the city's planners have made efforts to diversify the economy into tourism, health care, and many other sectors. As early as 1974, Texas City was placed on the top-ten list for the EPA superfund. Outdated practices for the disposal of toxic waste have continued there for years.
As of 2010, SSA Marine Company had plans to build a major new cargo container shipping terminal known as the Texas City International Terminal at Shoal Point. The project is intended to capitalize on the expansion of the Panama Canal, scheduled for completion in 2014, which city officials expect to substantially increase trade between the Gulf Coast and Asia.
The Port of Texas City, operated by the Port of Texas City / Texas City Terminal Railway, is the eighth-largest port in the United States and the third-largest in Texas, with waterborne tonnage exceeding 78 million net tons. The Texas City Terminal Railway Company provides an important land link to the port, handling over 25,000 carloads per year. The Port of Texas City's success as a privately owned port has been aided by its shareholders, the Union Pacific and Burlington Northern Santa Fe railroads, whose connections allow for expeditious interchange of their traffic.
In 2008, the city government replaced civilian code-enforcement officers with police officers after finding that residents tended to ignore civilian officials, who must go through a lengthy process to force compliance, said George Fuller, city director of community development.
The Texas Department of Criminal Justice maintains the Young Medical Facility Complex for females in Texas City. Young opened in 1996 as the Texas City Regional Medical Unit.
The Texas City Post Office is located at 2002 11th Avenue North, in the Tradewinds Shopping Center.
Most of Texas City is served by the Texas City Independent School District, which has four elementary schools for grades K–4: Kohfeldt Elementary, Roosevelt-Wilson Elementary, Heights Elementary, and Guajardo Elementary. The TCISD intermediate school, Levi Fry Intermediate, provides for fifth and sixth graders, and one TCISD middle school, Blocker Middle School, provides for seventh and eighth graders. Texas City High School serves the TCISD portion of Texas City.
Other portions are a part of the Dickinson Independent School District.
Some were previously in the La Marque Independent School District. On December 2, 2015, Texas Education Agency (TEA) Commissioner Michael Williams announced that the Texas City Independent School District would absorb the La Marque district effective July 1, 2016.
Our Lady of Fatima School, a Roman Catholic elementary school operated by the Archdiocese of Galveston-Houston, is in Texas City.
Texas City is served by the College of the Mainland, which is located in Texas City.
The Moore Memorial Public Library is located at 1701 9th Avenue North. In 1928, the City of Texas City dedicated a room in city hall to form a municipal library. The Texas City Civic Club operated the library in the room. In 1947, city hall received damage from the Texas City explosion; it was later demolished. In 1948, the library moved to a former house at 5th Street and 9th Avenue North and received its current name; it was named after Hugh Benton Moore and Helen Moore. In 1964, the library moved into its current building. In 1984, the building was expanded to 21,000 square feet (2,000 m2).
The Texas City Museum is at 409 6th Street North, in a two-story building formerly occupied by J. C. Penney Co. It is open Tuesday through Saturday, 10 – 4. The Galveston County Model Railroad Club exhibit on the second floor is open on Saturdays.
The city operates 42 parks, some of which are part of the Great Texas Coastal Birding Trail.
The Texas City Prairie Preserve is a 2,300-acre (930-hectare) nature preserve located on the shores of Moses Lake opposite the city. The terrain of the preserve includes prairie and wetland habitats. The preserve includes 40 acres (16 hectares) of public-access areas, including campsites. The remainder of the preserve is available for tours, including boardwalk access through the marshes.
The Bay Street Park is a 45-acre (18-hectare) property near the bay and the levee. Part of the park commemorates the Aero Squadron, one of the first U.S. Army air squadrons and a precursor to the modern Air Force. The rest of the park features wilderness trails and family entertainment areas.
Nessler Park is a 55-acre (22-hectare) property used for community events such as the annual "Music Fest by the Bay". Other large city parks include Carver Park, Godard Park, and Holland Park.
The centerpiece of Texas City's Heritage Square historical district is the former residence of one of the city's fathers, Frank B. Davison, located at 109 3rd Ave. N, just 5⁄8 mile (1 kilometer) west of the Texas City Dike's location. The Davison Home, maintained by the Texas City Museum with the help of the Texas City Historical Association, is a Victorian-styled home finished in 1897, and the site where the first child was born in the new community of Texas City.
The major freeway serving the area is the Gulf Freeway, part of Interstate 45, which connects Texas City with Galveston and Houston. Texas State Highway 146 locally connects Texas City with other Galveston Bay Area communities on the shoreline. Texas Loop 197 combines with Highway 146 to form a ring around the city, providing access to the city's major areas.
Greyhound Bus Lines provides passenger bus service to destinations nationwide at the Texas City La Marque Station in neighboring La Marque. Amtrak provides a connecting motorcoach service from nearby Galveston.